Silicone Dispensing with Metering and Mixing Machines

PAR 200 & PAR 200C

Silicone Dispensing

High reliability together with perfect dispensing are the core features of the PAR 200 and PAR 200C metering and mixing machines. Proven piston pump technology, combined with the latest METER MIX® in-line drive mechanism (ILD) ensures accurate and consistent processing of materials with high mix ratios or vastly differing viscosities. The PAR 200 machine incorporates a follower seal plate for the major component and a gravity feed reservoir for the minor component, enabling the machine to process a mix of high-viscosity and low-viscosity resins, sealants and adhesives. The PAR 200C machine incorporates twin follower seal plates for clean, direct dispensing of the materials from the original containers. These characteristics enable the PAR 200 and PAR 200C to be used for a wide range of applications, e.g. silicone dispensing, component bonding and sealing, insulated glazing, structural glazing or moulding.

Typical Applications

  • Component Bonding & Sealing
  • Insulated Glazing
  • Structural Glazing
  • Moulding


Typical Materials

    • Polyurethane
    • Epoxy
    • Silicone
    • Methacrylate
    • Polysulphide

    Technical Data

      PAR 200 & PAR 200C
    Ratio Range Capability 1:1 to 20:1
    (depending upon pumps selected)
    Viscosity acceptance Up to 1,500,000 mPa.s
    Shot size Available from approx. 11ml up to 194ml at 10:1 volumetric ratio
    Cycle Rate Up to 15 shots per minute (depending upon viscosity)
    Mixing Disposable Static
    Major component drum/pail size Approx. 200lt (52,63 gal)
    Minor component reservoir size 30lt (7,9 gal) stainless steel (PAR 200)
    Minor component drum/pail size PAR 200C: 20lt (5,27 gal)
    PAR 200C-200: 200lt (52,63 gal)

    Standard Features

    • Floor mounted machine
    • Metering Pumps: Single acting positive displacement
    • Mixer Valve: Pneumatically operated TSV601 Mixer Valve
    • “Operator Controlled” shot size selection
    • Service indicator lamp
    • Controls:
      • Integrated PLC control with HMI operator interface
      • Dispense pressure regulator and gauge
      • Air supply filter/regulator and gauge with connection check unit
      • Main Off/On switch
      • Emergency Stop & Reset Buttons
      • Anti-gel automatic purge timer
      • Shot counter/repeater unit for multiple shot applications
      • Either foot pedal or hand held trigger start options available
      • 230V/50Hz or 110V/60Hz AC electric supply + compressed air @ 80 p.s.i.

    Available Options

      • Shot size adjuster with digital reference indicator
      • Digitally controlled heating to follower plate, reservoir, pumps and hoses
      • Electronic low-level sensing to both materials with visual and audible alarms
      • Stainless steel wetted parts to protect against corrosion
      • Hardened parts to protect against abrasion
      • Swiveling boom assembly to support hand held mixer valve
      • Rotary/Static disposable mixing option (electrically driven)