LiquidFlow 2
Versatile machine for accurate dispensing of small beads
Progressive cavity pump for two part metering and mixing
The LiquidFlow 2 is a versatile and efficient metering and mixing system for accurate dispensing of small beads and shots of two-part materials. One of the major benefits with this machine is the DC electric drive unit and progressive cavity pump technology which ensures very precise dispensing with high economic efficiency at the same time. Due to the compact size of the LiquidFlow 2, it can be easily mounted on a robotic applicator with various material feeding options. It could process the following materials:
- Polyurethane
- Epoxy
- Silicone
- Methacrylate
Typical applications
- Electronic potting
- Sealing
- Component bonding
Your benefits
- Precise small metered dosing or beading
- Continuous flow
- Pulsation-free dispensing
- Variable mixing ratio
- Quiet operation
- Accurate flow-rate control
Technical Data
| Nominal Size (ml) | 2 x 0,01 | 2 x 0,05 | 2 x 0,15 | 2 x 0,30 |
| Specific volume [ml/rev] | 0,026 | 0,120 | 0,330 | 0,600 |
| Shot size min [ml]¹ | 0,006 | 0,030 | 0,080 | 0,150 |
| Output rate [ml/min]² | 0,26…3,90 | 1,2…18,1 | 3,3…50,0 | 6,0…90,0 |
| Metering accuracy [%]³ | ± 1 | ± 1 | ± 1 | ± 1 |
| Mixing ratio A:B | 1:1…10:1 | 1:1…10:1 | 1:1…10:1 | 1:1…10:1 |
| P work [bar] | 6 | 6 | 6 | 6 |
| P max [bar] | 10 | 10 | 10 | 10 |
| Speed range [rev/min] | 10…150 | 10…150 | 10…150 | 10…150 |
¹ At mixing ration 1:1
² Depending on mixing ratio, material properties, mixer type, alignment of PCP, etc.
³Absolte accuracy related to one revolution, depending on material properties, mixer type, etc.
Standard Features
- Bench top or robot mounted machine
- 600 ml cartridge feed
- Metering Pumps: Continuous progressive cavity
- “Metered” or “Operator Controlled” shot size selection
- Service indicator LED
- Controls:
- Integrated PLC control (with colour HMI touchscreen operator interface)
- “Recipe” function with up to 50 programmable ratios, flow rates and shot sizes
- Main Off/On switch
- Emergency Stop & Reset Buttons
- Anti-gel automatic purge timer
- Either foot pedal or remote start options available
Options
- 2.5 lt & 6 lt reservoirs
- Digitally controlled heating circuits for reservoirs (when fitted)
- Bulk feed transfer pump/accumulator facility directly from suppliers containers
- Electric agitation to material reservoirs (when fitted)
- Electronic low-level sensing to material reservoirs (when fitted) with visual and audible alarms
- Stainless steel wetted parts to protect against corrosion
- Upgraded component parts for protection against abrasion
- Nitrogen purge facility to material reservoirs (when fitted)