METER MIX PS20 piston pump metering system
PasteShot 20
Machine for dispensing small-medium shot sizes typically between 5 to 120 ml of high-viscosity material directly from 20 lt drums

Piston pump metering system for 1K and 2K applications

The PasteShot 20 metering and mixing machine was developed primarily for dispensing small to medium shots in bonding, sealing and cartridge filling applications. It is suited for shot sizes typically 5 ml to 135 ml (depending upon ratio) of high-viscosity materials which can be fed directly from 20 lt drums. The machine can be utilized for direct dispensing onto components, or into cartridges for manual applications. Reliable piston pumps ensure an accurate and consistent processing of materials with high mix ratios or vastly differing viscosities:

  • Epoxy
  • Polyurethane
  • Silicone
  • Methacrylate
     

Typical applications

  • Component bonding and sealing    
  • Cartridge/Syringe filling

Your benefits

  • Precise metered shot sizes achievable
  • Reliable and robust operation
  • Suitable for processing abrasive media (when fitted with hardened parts)

Versions

meter-mix-pasteshot-20a-drawing.jpg

PasteShot 20A

Floor mounted portable 20 lt + tank pneumatic in-line drive piston pump

meter-mix-pasteshot-20c-drawing.jpg

PasteShot 20C

Floor mounted portable 20 lt + 20 lt pneumatic in-line drive piston pump

meter-mix-pasteshot-20ce-drawing.jpg

PasteShot 20CE

Floor mounted portable 20 lt + 20 lt electric drive piston pump

meter-mix-pasteshot-20f-drawing.jpg

PasteShot 20F

Floor mounted portable 20 lt pneumatic drive 1k piston pump

Technical Data

Ratio range capability 1:1 to 12:1 (depending upon pumps selected)
Viscosity acceptance Up to 1,500,000 mPa.s
Shot size Available from approx. 11 ml up to 108 ml at 10:1 volumetric ratio
Cycle Rate Up to 15 shots per minute (depending upon viscosity)
Mixing Disposable Static or Rotary/Static
Major component drum/pail size Typically approx. 20 lt (5 gal) (depending upon drum dimensions)
Minor component reservoir size 18 lt (4,74 gal) stainless steel
Minor component drum/pail size 18 lt (4,74 gal) stainless steel
Electric supply 230 V / 50 Hz or 110 V /60 Hz AC
Compressed air 80 p.s.i.

Standard Features

  • Mixer Valve: Pneumatically operated TSV601 Mixer Valve or AST6001 1k Valve
  • “Metered” or “Operator Controlled” shot size selection
  • Service indicator LED
  • Controls:
    • Integrated PLC control with HMI operator interface
    • Manual shot size adjuster with digital reference indicator on PasteShot 20F
    • Dispense pressure regulator and gauge
    • Air supply filter/regulator and gauge with connection check unit
    • Anti-gel automatic purge timer
    • Shot counter/repeater unit for multiple shot applications
    • Either foot pedal or hand held trigger start options available
       

Options

  • Shot size adjuster with digital reference indicator on PasteShot 20A and 20C
  • Digitally controlled heating to follower plate, reservoir, pumps and hoses
  • Electronic low-level sensing to both materials with visual and audible alarms
  • Stainless steel wetted parts to protect against corrosion
  • Hardened parts to protect against abrasion
  • Swivelling boom assembly to support hand held mixer valve
  • Rotary/Static disposable mixing option (electrically driven) – depending upon material viscosity
  • Available with dual independent servo drive system for precise flow rate control and variable ratio feature on PasteShot 20CE