1K Dispensing System for Lubricants and Sealants

PAR 20F & PAR 200F

1K Dispensing System

Whether you are looking to process one-component silicone, polyurethane, epoxy or grease, the METER MIX® PAR 20F and PAR 200F are economically convincing, highly-efficient 1K dispensing systems. The machines are specially developed for applications such as cartridge/syringe filling, grease dispensing or thermal paste dosing. The PAR 20F & PAR 200F machines incorporate a lift/ram assembly with built-in follower seal plate to enable high-viscosity materials to be processed directly from the suppliers container. In addition, these machines can also be interfaced with automated systems for fully or semi-automatic applications.

Typical Applications

  • Cartridge/Syringe filling
  • Grease Dosing
  • Thermal Paste Metering

Typical Materials

  • Silicone
  • Polyurethane
  • Epoxy
  • Grease

Technical Data

  PAR 20F & PAR 200F
Viscosity acceptance Up to 1,500,000 mPa.s
Shot size Available from approx. 5ml up to 175ml (depending upon model & pump size selection)
Cycle Rate Up to 15 shots per minute
(depending upon viscosity)
Major component drum/pail size approx. 20 lt (5,27 gal), depending upon drum dimensions)
Drum/pail size PAR 20F: approx. 20 lt (5,27 gal), depending upon drum dimensions
PAR 200F: approx 200lt (52,63 gal)

Standard Features

  • Floor mounted machine (PAR 200F) with castors for portability (PAR 20F)
  • Metering Pump: Single acting positive displacement
  • Outlet Valve: Pneumatically operated AST6001 Tipseal Valve
  • “Metered” or “Operator Controlled” shot size selection
  • Service indicator lamp
  • Controls:
    • Integrated PLC control with HMI operator interface
    • Manual shot size adjuster with digital reference indicator
    • Dispense pressure regulator and gauge
    • Air supply filter/regulator and gauge with connection check unit
    • Main Off/On switch
    • Emergency Stop & Reset Buttons
    • Shot counter/repeater unit for multiple shot applications
    • Either foot pedal or hand held trigger start options available
    • 230V/50Hz or 110V/60Hz AC electric supply + compressed air @ 80 p.s.i.

Available Options

  • Digitally controlled heating to follower plate, pump and hose
  • Electronic low-level sensing with visual and audible alarms
  • Stainless steel wetted parts to protect against corrosion
  • Hardened parts to protect against abrasion
  • Swiveling boom assembly to support hand held mixer valve