METER MIX LS2 Dispenser
LiquidShot 2
Machine for dispensing precise volumes typically less than 3 ml per shot

Dispenser for small shots of adhesives and epoxy resins

The LiquidShot 2 metering and mixing system is especially developed for dispensing precise volumes typically less than 3 ml per shot. This makes it perfect for electronic encapsulation applications which require absolute precision. The LiquidShot 2 provides a secure, proven fixed ratio metering control unit during the dispensing process. Furthermore, the lightweight construction allows direct installation onto an articulated robot. The machine processes a variety of two-part materials:

  • Epoxy
  • Polyurethane
  • Silicone
  • Methacrylate
     

Typical applications

  • Electronic potting
  • Component bonding
  • Sealing
     

Your benefits

  • Compact size, suitable for mounting on XYZ robot
  • Precise, small volume metered shots
  • Accurate flow-rate control (LiquidShot 2E)
  • Suitable for processing filled materials (when fitted with hardened parts)
     

Versions

METER MIX Liquidshot 2P drawing

LiquidShot 2P

Pneumatic drive, rod displacement pump

METER MIX Liquidshot 2E drawing

LiquidShot 2E

Electric drive, rod displacement pump

Technical Data

Available from approx. 0.04 ml up to 6.79 ml at a ratio of 1:1 by volume

Ratio range capability 1:1 to 12:1 (depending upon pumps selected)
Viscosity acceptance Up to 500,000 mPas (depending upon material thixotropy)
Shot size Available from approx. 0.04 ml up to 6.79 ml at a ratio of 1:1 by volume
Cycle rate Up to 15 shots per minute (depending upon viscosity)
Mixing Disposable Static
Reservoir capacity 600 ml plastic cartridges
Electric supply 230 V / 50 Hz or 110 V /60 Hz AC
Compressed air 80 p.s.i.

Standard Features

  • Single acting rod-displacement pumps
  • Metered Shot mode on LiquidShot 2P
  • Metered, incremental or robot shot size selection on LiquidShot 2E
  • Shot size adjuster with digital reference indicator on LiquidShot 2P
  • Electronic shot size and flow rate control on LiquidShot 2E
  • Service indicator LED
  • Controls:
    • Integrated PLC control (with colour HMI touchscreen operator interface)
    • LiquidShot 2E incorporates “Recipe” function with up to 50 programmable flow rate and shot sizes
    • Anti-gel automatic purge timer
    • Either foot pedal or remote start options available

Options

  • 6 lt (1,58 gal) capacity reservoir sizes on special support framework
  • Digitally controlled heating
  • Low-level sensing 
  • Electric agitation on reservoirs
  • Pressurised cartridge feeds for processing thick (non-pourable) materials
  • Stainless steel wetted parts to protect against corrosion
  • Hardened parts to protect against abrasion
  • Bulk transfer pump & accumulator feed facility directly from suppliers containers