METER MIX LF50 resin dispensing system
LiquidFlow 50
High-level machine for larger flow production demands

2k resin dispensing system

The LiquidFlow 50 is a high-level metering and mixing machine for larger flow production demands. The benefit from this machine is the portable framework with the facility to mount larger material reservoirs and, if requested, a higher flow rate is also achievable. One major advantage of the LiquidFlow 50  is the independent inverter driven motor control for each gear pump, instead of using a lower cost but less efficient gear and toothed belt or chain assembly. This feature allows the operator to easily change the mixing ratio very simply on the built in HMI touchscreen. The machine is mostly used  for manual applications,  but it can also be interfaced to fully or semi-automatic systems. Typical materials which can be processed are:

•Polyurethane

•Epoxy

•Silicone

    Typical applications

    • Electronic potting
    • Casting
    • Moulding
    • Component bonding and sealing
    • Filter manufacturing
       

    Your benefits

    • Larger flow rates are possible 
    • Can be used for a variety of different applications 
    • Continuous flow
    • Pulsation-free dispensing
    • Variable mixing ratio
    • Quiet operation
    • Accurate flow-rate control
       

    Technical Data

    Ratio range capability 1:1 to 100:1 (depending upon pumps selected)
    Viscosity acceptance Up to 500,000 mPas (when fitted with transfer pump/accumulator option)
    Shot size Typically available from approx. 10 ml upwards
    Flow rate Typically up to approx. 8 lt/min (depending upon viscosity)
    Mixing Disposable Static or Rotary/Static
    Reservoir capacity 18 lt (4,74 gal) stainless steel with silica gel moisture protection
    Electric supply 230 V / 50 Hz or 110 V /60 Hz AC
    Compressed air 80 p.s.i.

    Standard Features

    • Metering Pumps: Electric inverter driven gear pumps
    • Mixer Valve: Pneumatically operated TSV601 Mixer Valve
    • “Metered” or “Operator Controlled” shot size selection
    • Service indicator LED
    • Controls:
      • Integrated PLC control with HMI touchscreen and variable ratio adjustment
      • Air supply filter/regulator and gauge with connection check unit
      • Anti-gel automatic purge timer
      • Either foot pedal, hand held trigger or remote start options available
         

    Options

    • Reservoir sizes up to 50 lt possible
    • Digitally controlled heating to reservoirs, pumps and hoses
    • Electric agitation to material reservoirs
    • Electronic low-level sensing to material reservoirs with visual and audible alarms
    • Stainless steel wetted parts to protect against corrosion
    • Hardened parts to protect against abrasion
    • Ultra-high precision gear metering pumps
    • Nitrogen purge facility to material reservoirs
    • Vacuum degassing to material reservoirs
    • Rotary/Static disposable mixing option (electrically driven)
    • Dynamic mixing head (electrically driven) for high flow applications
    • Bulk feed transfer pump/accumulator facility directly from suppliers containers