METER MIX LS3 dosing system
LiquidShot 3
Piston pump technology for small applications typically dispensing between 3 to 60 ml per shot

Cost efficient dosing system for two part materials

The LiquidShot 3 is the first choice for all applications focused in electronic potting and encapsulation. Proven piston pump technology allows for consistent, small shot dispensing applications typically dispensing between 3 ml to  60 ml per shot. The metering and mixing system provides a clean and cost-efficient solution and is perfect for small and medium production volumes. The machine can be up and running in a very short period of time and is easy to handle, whether for beginners or experts. The LiquidShot 3 processes many two component materials with differing mixing ratios or vastly different viscosities: 

  • Polyurethane
  • Epoxy
  • Silicone

Typical applications

  • Electronic potting and encapsulation
  • Casting
  • Component bonding
  • Brush setting

Your benefits

  • Cost-effective
  • Compact size on LiquidShot 3B, 3C, 3CE and 3CM
  • Portable trolley frame on LiquidShot 3CT and 3CTE
  • Precise volumetric metered  shots
  • Accurate flow-rate control on LiquidShot 3CE and 3CTE
  • Suitable for processing filled/abrasive materials (when fitted with hardened parts)
     

Versions

METER MIX Liquidshot 3b drawing

Benchtop entry level pneumatic side-by-side drive piston pump

LiquidShot 3B

METER MIX Liquidshot 3C drawing

Benchtop pneumatic in-line drive piston pump

LiquidShot 3C

METER MIX Liquidshot 3CE

Benchtop electric in-line drive piston pump

LiquidShot 3CE

METER MIX Liquidshot 3CM drawing

Benchtop pneumatic in-line drive piston pump with modular options

LiquidShot 3CM

METER MIX Liquidshot 3CT drawing

Floor mounted portable pneumatic in-line drive piston pump

LiquidShot 3CT

METER MIX Liquidshot 3CTE drawing

Floor mounted portable electric in-line drive piston pump

LiquidShot 3CTE

Technical Data

Ratio range capability 1:1 to 14:1 (depending upon pumps selected)
Viscosity acceptance Up to 500,000 mPas (depending upon material thixotropy)
Shot size Up to 30 shots per minute (depending upon viscosity)
Cycle rate Up to 15 shots per minute (depending upon viscosity)
Mixing Disposable Static or Rotary/Static
Reservoir capacity 6 lt (1,58 gal) stainless steel with silica gel moisture protection 18 lt (4,74 gal) available, depending on construction
Electric supply 230 V / 50 Hz or 110 V /60 Hz AC
Compressed air 80 p.s.i.

Standard Features

  • Mixer Valve: Pneumatically operated TSV601 Mixer Valve
  • “Metered Shot” and “Operator Controlled” shot size selection
  • Shot size adjuster with digital reference indicator on LiquidShot 3C and 3CT
  • Service indicator LED
  • Controls:
    • Integrated PLC control with HMI operator interface 
    • “Recipe” function with up to 50 programmable shot sizes and flow rates on LiquidShot 3CE and 3CTE
    • Dispense pressure regulator and gauge on LiquidShot 3C and 3CT
    • Air supply filter/regulator and gauge with connection check unit
    • Anti-gel automatic purge timer
    • Shot counter/repeater unit for multiple shot applications on LiquidShot 3C and 3CT
    • Either foot pedal or hand held trigger start options available
       

Options

  • Digitally controlled heating to reservoirs, pumps and hoses
  • Electric agitation to material reservoirs
  • Electronic low-level sensing to material reservoirs with visual and audible alarms
  • Stainless steel wetted parts to protect against corrosion
  • Hardened parts to protect against abrasion
  • Nitrogen purge facility to material reservoirs
  • Vacuum degassing to material reservoirs
  • Rotary/Static disposable mixing option (electrically driven)
  • Bulk feed transfer pump facility directly from suppliers containers